Discostat automatic reset Temperature controller
Tmax 150°C / Imax 16A / switches 3 phases simultaneously / orientation independent
Available on request.
Properly installed, this temperature regulator may be used for electrical devices with a three-phases contact, for example in water heaters and thermal heaters.
A vaulted bimetal disc is used as a temperature sensing element. Placed directly on the mounting plate, the bimetal disc reacts quickly on changes in temperature. Upon reaching the preset temperature the bimetall disc achieves the opening of the electrical contacts. Upon cooling, the disc snaps back into its original position thereby closing the circuit again.
Available on request.
Properly installed, this temperature regulator may be used for electrical devices with a three-phases contact, for example in water heaters and thermal heaters.
A vaulted bimetal disc is used as a temperature sensing element. Placed directly on the mounting plate, the bimetal disc reacts quickly on changes in temperature. Upon reaching the preset temperature the bimetall disc achieves the opening of the electrical contacts. Upon cooling, the disc snaps back into its original position thereby closing the circuit again.
Model :
IC161001
| Nominal current: |
AC 3 x 16 A 230 V NI, 1.000 cycles AC 3 x 10 A 400 V NI, 1.000 cycles |
| Automatic reset: | < -20 °C |
| Function with rising temperature: | opening |
| Closing tolerance: | ± 7,5 K |
| Tolerance: | T 160 (10 A); T 150 (16 A) |
| Design: | according to DIN EN 60730 protection class I |
| Contact material: | Ag |
| Temperature changing rate: | > 1 K/min |
| Mark of conformity: |
refer to approval list which is available upon request |
- Simultaneous switching of all 3 phases
- Fast response behavior, position independant
- Various connection options
- Long service life
