Thermostat IC14xxxx Series
Temperature setting range to 240°C / Imax 16A
Properly installed, this thermostat is suitable for controlling the temperature of a surface e.g. in deep fat fryers, waffle irons, baby bottle warmers, water heaters, contact grills.
The contact opens instantaneously as soon as the preset temperature is reached and closes automatically when the temperature has dropped by the differential.
Properly installed, this thermostat is suitable for controlling the temperature of a surface e.g. in deep fat fryers, waffle irons, baby bottle warmers, water heaters, contact grills.
The contact opens instantaneously as soon as the preset temperature is reached and closes automatically when the temperature has dropped by the differential.
Model :
IC14xxxx
IC141141
| Voltage | Power | Switching cycles | Tmax | Temperature setting range | ||
| V AC | A | VDE | cURus | °C | min °C | max. °C |
| 120 | 15 | - | 100000 | 230 | 0 | 240 |
| 240 | 13,5 | 30000 | 100000 | 240 * | 0 | 240 |
| 240 | 16 | 100000 | 100000 | 230 | 0 | 240 |
| 240 | 16 | 30000 | 100000 | 200 * | 0 | 220 |
| 240 | 16 | 100000 | 100000 | 65 * | 0 | 85 |
| T max = max. switch head temperature | ||||||
| * small switching difference possible | ||||||
| Tolerance | ± 5 % | |||||
| Switching differential | 8 ... 25 K, depending on installation and design | |||||
| Rotation range | 115, 180, 200, 270, 305 °< | |||||
|
Temperature change rate |
>1 K per min. | |||||
| Structure | to DIN EN 60 730-1 / VDE 0631 | |||||
| Protection class | I | |||||
| Tracking resistance | PTI > 175 or 250 depending on version | |||||
| Mark of conformity | see list of approvals (we will gladly provide you with this list upon request) | |||||
| Setting spindle | Ø 6 mm, L2: 10 – 30 mm, Adjustment screw for fixed setting | |||||
IC141142
| Voltage | Power | Switching cycles | Tmax | Temperature setting range | ||
| V AC | A | VDE | cURus | °C | min °C | max. °C |
| 240 | 10 | 100000 | - | 210 | 0 | 150 |
| 240 | 10 | 30000 | - | 210 * | 0 | 150 |
| 240 | 10 | 100000 | - | 65 * | 0 | 85 |
| T max = max. Shift head temperature | ||||||
| * small switching difference possible | ||||||
| Tolerance | ± 5 % | |||||
| Switching differential | 8 ... 25 K, depending on installation and design | |||||
| Rotation range | 115, 180, 200, 270, 305 ° < | |||||
| Temperature change rate | > 1 K/min | |||||
| Structure | to DIN EN 60 730-1 / VDE 0631 | |||||
| Protection class | I | |||||
| Tracking resistance | PTI > 175 or 250 depending on version | |||||
| Setting spindle | Ø 6 mm, L2: 10 – 30 mm, Adjustment screw for fixed setting | |||||
- The high current carrying capacity of the controller is achieved by the special switching spring geometry and high-quality silver contacts.
- Small switching differences are possible due to the special spring material and special spring geometries.
- Simple and quick assembly. Single-hole mounting or optionally with mounting bracket.
- Plug-in, screw and roll connections for secure connection technology.
- Available in various spindle designs and selectable setting ranges.
- Stable and temperature-resistant structure through the use of ceramic insulating rings.
