A conductivity sensor measures the ability of a solution to conduct an electrical current. It is the presence of ions in a solution that allow the solution to be conductive: the greater the concentration of ions, the greater the conductivity. Accusensor in-line conductivity probes are designed for pure water monitoring, chemical processing and pharmaceutical manufacturing processes. These conductivity sensors offer accurate, reliable measurement to ensure process control and compliance.

• Conductivity Measure Range: 0 μS/cm ~ 20.00 μS/cm
• Resolution: 0.01 μS/cm  
• Cell Constant: K=0.01
• Reference Temperature: 15.0 ~ 35.0 ℃
• Temperature Coefficient: 0.00% ~ 10.00 %
• TDS Measure Range: 0 ppm ~ 10.00ppm
• TDS Coefficient: 0.40 ~ 1.0
• Temperature Measure Range: -10.0 ~ 110.0 ℃
• Pressure Range: 0 ~ -8 bar
• Case Material: PP
• Probe Material: Platinum, Glass
• Electrode Coefficient: Dual-Pole, K= 0.01 cm-1
• Electrode Screw: NPT 3/4”
• Connector: Terminal
• Cable Length: 5m
• Communication Interface/Protocol: RS-485/ Modbus RTU
• Power: DC 12V
• Output: Conductivity, TDS, Temperature
• Ingress Protection: IP68

• Robust, compact sensor
• For measuring ranges from 0 μS/cm ~ 20.00 μS/cm
• Heat and cold resistant
• Operating temperatures from -10 to +110 °C
• Chemically resistant to aggressive measured media
• Protection type IP68

1.     Laboratory and Analytical

2.     Food and Beverage